ENGLISH
Set Up and connections
Initial Settings
1
MENU
2
Select a language.
3
Select Country Area.
Set Up
Set Up
JVC logo appears
WIDE LCD PANEL TV INSTRUCTIONS
LT-19A1
Country Area
Language
English
1. Select
2. Set
1. Select
2. Set
Area - 1
Area - 2
ไทย
OK
OK
• The power on the unit can also be used.
Portugues
Melayu
Pуccкий
Castellano
Français
Укpaїнcькa
Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines
• The select the new Country Area after Initial Setting has completed.
-%.5
(While the cursor is pointing to Picture
menu and hold for 3 seconds.)
1
AERIAL
If you select Country Area to “Area-1”
If you select Country Area to “Area-2”
4. Select the teletext language group.
4. Select Air or Cable.
1. Select
Set Up
Set Up
1. Select
Teletext Language
Auto Program
OK
OK
Group-1
Group-2
Group-3
Group-4
Group-5
Air
Cable
DVD player
(HDMI compatible)
2. Set
GGT0335-001A-H
0310SCT-NF-MT
HDMI
© 2010 Victor Company of Japan, Limited
5. Automatically register channels (Auto Program).
5. Searching for the channels (Auto Program)
PC
PC
Safety Precautions
Set Up
Set Up
OK
VIDEO-2
PC IN
(D-SUB)
Auto Program
Auto Program
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
CH 40
CH 40
VIDEO-2
VIDEO-1
V
Component input Composite input
5 %
5 %
Y
HDMI Analog /
DVI Analog / PC Audio
VIDEO-2
VIDEO-2
V
Y
Y
/
/
V
V
Pb
Pr
L
L
6. Check what was registered.
6. Check what was registered.
Pb
Pr
L
Pb
Pr
L
• Follow this manual regarding setup!
• Hold the TV so as not to scratch the screen!
VIDEO-1
R
R
- Connect only to a 110-240 V, 50/60Hz AC outlet.
• Make enough room for inserting and removing the power
plug!
- Do not touch the screen when carrying the TV.
R
R
Set Up
Set Up
OK
OK
• Never dismantle the rear panel!
- It many cause an electric shock.
• Never obstruct the ventilation holes!
- It may cause overheating or a fire.
• Handle LCD panel with care!
- Use a soft, dry cloth when cleaning.
• Never try repair the TV yourself!
- If the problem cannot be solved in “Troubleshooting” unplug the power
cord and contact your retailer.
Game consoles Video camera
Channel Summary
Edit
PR
Game
CH/CC
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
ID
Skip
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Video
OR
ID
CH / CC
CH 02
CH 05
CH 47
CH 09
CH 11
CH 07
CH 28
CH 32
CH 12
CH 03
01
02
03
04
05
06
07
08
09
10
VCR
(DVD Player)
BBCABC
ABCDEF
BBCABC
ABCDEF
To VIDEO-1
• Place the TV as close to the outlet as possible!
- The main power supply for this TV is controlled by inserting or removing
the power plug.
• Never cut or damage the power cord!
- If the AC plug is not the right shape, or the power cord is not long
enough, use an appropriate plug adapter or extension
cable. (Consult your retailer)
VCR (DVD player)
• If you want to edit channel, follow Edit
function in Set Up menu.
• If you want to set undesired channels
to be skiped, follow Channel Summary
function in Set Up menu.
DVD Player
VCR
To VIDEO-1
Yes
Remote control buttons and functions
Using the TV’s Menu ---> Area - 1
• Unplug the power cord when going out!
- The power buttons on the remote control and the TV unit
cannot completely turn off the TV. (Make appropriate
arrangements for bedridden people.)
• If a television is not positioned in a sufficiently stable
location, it can be potentially hazardous due to falling. Many
injuries, particularly to children, can be avoided by talking
simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the
television.
- Only using furniture that can safely support the television.
- Ensuring the television is not overhanging the edge of the supporting
furniture.
- Not placing the television on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television to a
suitable support.
Adjust Volume
9
Select the stereo, mono or bilingual language.
Stereo / I II
-%.5
1 Power On / Off
2 Colour buttons
! Volume control / Turn off muting
" View the Teletext
(I / II / O / m / Mono )
Display MENU.
9
ꢌ
ꢀ
VOL
VOL
Bass
Treble
Weaker <--> Stronger
1/ 2 Select Main menu.
(Picture / Sound / Features / Set Up)
ꢉ
ꢏ
Weaker <--> Stronger
3 Turn on “Clear SD”
4 Turn on “Zoom”
5 Turn on “Eco Mode”
6 To Teletext
# Change channel / Page / Hyper Scan
$ Channel information
Surround
Balance
Al Volume
Ambient sound (Off / On)
• Do not allow the TV to fall!
ꢁ
ꢂ
ꢃ
3/ 4 Select sub menu.
1/ 2 Change setting.
When 2 is shown.
Left Stronger <--> Right Stronger
Prevent sudden increase or decrease of sound.
- Do not rest your elbows on, or allow children to hang from the TV.
- There is a risk that the TV will fall and cause injuries.
- Make use of the hole on the back of the stand to prevent the TV from
falling easily.
Clear SD
ZOOM
Picture
% Switch between TV / Video input
& Return Plus / Return function
( Turn the volume off / on
CH
Picture Mode
Soft
CH
2
5
8
0
3
6
9
1
4
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
White Balance
Features
(Off / On)
7 Display on-screen menu
8 Operate the menu
Turns on the TV from standby mode.
On Timer
) Change channel / page
2 Display function setting.
PR
Select a channel. ( 01 - 99 )
Warm
7
ꢀ
• If the TV is damaged or behaving strangely, stop using it at
9 To previous screen
ꢄ
RETURN
ECO
+
On Timer Set a time. ( 00:00 - 12:00 )
Turns off the TV to standby mode.
(Off / 10 / 20 / ...120)
Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2)
3/ 4 Select function.
1/ 2 Change setting.
once!
ꢋ
ꢍ
Sleep Timer
Blue Back
Eco Mode
ꢅ
ꢆ
- Unplug the power cord and contact your retailer.
TV/VIDEO
MENU
Zoom : Change the aspect ratio
V-Scroll
- Not standing the television on cloth or other materials placed between
the television and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach
the television or its controls.
46ꢀ6)$%/
-%.5
• Never place anything on the TV!
- Placing liquid, naked flames, cloths, paper, etc.
on the TV may cause a fire.
• Never expose to rain or moisture!
- To prevent fire or electric shock, never allow
liquids to enter the unit.
• When 720p or 1080i or 1080p
signal is received, “Full” and
“Slim” can be selected.
• In PC mode, “Regular” and
“Full” can be selected.
OK
or
Exit from Menu.
Confirm after setting.
Zoom
Auto
Regular
14:9 Zoom
16:9 Zoom
1. Select
2. Set
Regular
OK
ꢇ
ꢈ
16:9 Zoom
OK
• Please see “Menu operation guide” at the bottom of menu on-screen.
DISPLAY
BACK
ꢎ
ꢏ
Auto Program Automatically registers channels.
Edit / Manual
16:9 Zoom Subtitle
Full
CHANNEL
VOLUME
Select the picture as you like.
(Standard / Soft / Bright)
MODE
Picture Mode
Move
Move a channel position by 2
and Adjust by 3/ 4.
Move the picture with 3or 4
while this bar is displayed.
• Never insert objects into the cabinet
Hyper Scan :
ꢉ
ꢊ
--
(Red)
Darker < > Brighter
Backlight
Contrast
Brightness
Sharpness
Colour
#(!..%,
openings!
ID
Edit a channel name by
.
--
Lower < > Higher
(Green)
- It many cause a fatal electric shock.
- Take care when children are near.
Insert
Insert a channel by
Select a CH/CC by 3/ 4.
Enter number by 0-9 buttons.
Delete a channel by
.
--
Darker < > Brighter
Press and hold
. PR changes without changing the picture screen.
Once you release the button, the picture of the selected PR will appear.
--
Softer < > Sharper
--
Lighter < > Deeper
• For more details on installation, usage and safety ➔ Consult your
(Yellow)
retailer.
Delete
Manual
.
--
Reddish < > Greenish *Only NTSC
Tint
(Blue)
(Red)
RM-C2020
LCD
Return Plus : Return to the frequently viewed channel.
Register a new channel by
.
Select the white balance of the picture.
White Balance
RETURN+
(Green)
(Cool / Mid / Warm)
Return Plus Programmed by select the frequently viewed channel then press and hold
.
Care when setting
Beginning channel search by
and
.
RETURN+
(Yellow)
(Blue)
Clear SD
For clearly picture
Features
Channel fine tunning by
If the picture or sound is unnatural by
for select a system.
and
.
Return Plus Canceled by press and hold
.
(Off / Mode-1 / Mode-2)
9Power requirements
• Connect the power cord only to a 110-240V,
50/60Hz AC outlet.
• To prevent the TV from falling thread the belt
through the hole on the back of the stand and
secure it to the TV rack.
Colour
For natural - looking pictures.
200 mm
Management
Return : Return to the previously viewed channel.
(Off / On)
Fix bright / dark pictures.
(Off / On)
Select an appropriate Colour system.
Language
Select your desired on screen display language.
Video-2 Setting Switch between video and component signal.
Picture
Management
Colour
“AAA/R03”
9Installation requirements
• To avoid overheating, ensure the unit has ample
room.
• Insert the batteries
(Video / Component)
Select Teletext language group.
(Group-1/ Group-2/ Group-3/ Group-4/ Group-5)
WARNING:
Batteries
If this symbol is shown,
it is only valid in the
European Union.
Use two “AAA/R03” dry cell batteries.
Insert the batteries from the · end,
making sure the · and ª polarities are
correct.
Teletext
Language
Hole for belt
Batteries shall not be exposed
to excessive heat such as direct
sunshine, fire or the like.
System
(Auto / PAL / SECAM / NTSC3.58 /
NTSC 4.43 / PAL-M / PAL-N)
Change the aspect ratio.
HDMI Setting Setting for HDMI input. (Size / Audio)
150 mm 50 mm
150 mm 50 mm
Zoom
PC Setting
Setting for PC input.
(Auto / PC Position / Phase / Pixel)
Belt
(not provided)
(Auto / Regular / 14:9 Zoom / 16:9 Zoom
/ 16:9 Zoom Subtitle / Full)
(continued)
3
Screw (not provided)
1
2
Using the TV’s Menu ---> Area - 2
Troubleshooting
CH / CC
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
US : The United States, Philippines, etc.
CCIR : The Middle East, Southeast Asia, etc.
OIRT : Eastern Europe, Russia, Vietnam, etc.
AUSTRALIA : Australia, etc.
Picture Mode Select the picture as you like.
On Timer
Turns on the TV from standby mode.
CH Select a channel. ( 02 - 69 )
On Timer Set a time. ( 00:00 - 12:00 )
Turns off the TV to standby mode.
(Off / 10 / 20 / ...120)
Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2)
(Standard / Soft / Bright)
Severe noise or snow
Poor picture quality
Unnatural colour >> Adjust “Colour” and “Backlight”.
Check “Colour System”. If “Auto” is selected.
--
Backlight
Picture
Brightness
Detail
Darker < > Brighter
Sleep Timer
Blue Back
Eco Mode
Check the aerial cable and TV connections .
Check the direction of the aerial.
--
Lower < > Higher
--
Darker < > Brighter
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-48, W+63 E48
US-49, W+64 E49
US-50, W+65 E50
US-51, W+66 E51
US-52, W+67 E52
US-53, W+68 E53
US-54, W+69 E54
US-55, W+70 E55
US-56, W+71 E56
US-57, W+72 E57
US-58, W+73 E58
US-59, W+74 E59
US-60, W+75 E60
US-61, W+76 E61
US-62, W+77 E62
US-63, W+78 E63
US-64, W+79 E64
US-65, W+80 E65
US-66, W+81 E66
US-67, W+82 E67
US-68, W+83 E68
US-69, W+84 E69
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
K
L
M
N
O
P
Q
R
S
T
U
V
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
Channel
CH
Check the aerial or its cable damaged or not.
Select the specific colour system manually.
Set to the following functions.
Picture Mode : Standard
Set to the following functions.
Picture Mode : Bright
--
Softer < > Sharper
US
US-02
CCIR
OIRT
AUSTRALIA
AU-0
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
E2
R1
Noise >>
--
Color
Lighter < > Deeper
Patterns, stripes or noise
US-03
US-04
US-05
US-06
US-07
US-08
US-09
US-10
US-11
US-12
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36 E21
US-22, W+37 E22
US-23, W+38 E23
US-24, W+39 E24
US-25, W+40 E25
US-26, W+41 E26
US-27, W+42 E27
US-28, W+43 E28
US-29, W+44 E29
US-30, W+45 E30
US-31, W+46 E31
US-32, W+47 E32
US-33, W+48 E33
US-34, W+49 E34
US-35, W+50 E35
US-36, W+51 E36
US-37, W+52 E37
US-38, W+53 E38
US-39, W+54 E39
US-40, W+55 E40
US-41, W+56 E41
US-42, W+57 E42
US-43, W+58 E43
US-44, W+59 E44
US-45, W+60 E45
US-46, W+61 E46
US-47, W+62 E47
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
--
Reddish < > Greenish *Only NTSC
Tint
R2
R6
R7
R8
R9
Interference caused by devices such as an amplifier, personal computer,
or a hair drier, Move it away from TV.
Dull picture >>
White Balance Select the white balance of the picture.
(Cool / Mid / Warm)
Auto Program Automatically registers channels.
Channel
Summary
Ghosting (Doubling of images)
Features
Clear SD
For clearly picture
(Red)
Poor sound
Skip
Cancel
ID
Skip the channel by
.
Interference occurs caused by signal reflection from mountains or building.
Try to adjust the aerial’s direction or use another antenna.
(Off / Mode-1 / Mode-2)
For natural - looking pictures.
(Off / On)
Fix bright / dark pictures.
(Off / On)
(Green)
R10
R11
R12
AU-10
AU-11
Adjust the “Bass” and “Treble”.
If receiving a poor signal in “Stereo/I II” switch to “Mono”.
Adjust the channel reception using “Manual”.
Cancel the skip channel by
.
Color
W
■
(Yellow)
Management
Edit a channel name by
.
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
Cannot turn it on
• Channels are to be skipped cannot be selected by
the CHANNEL - / + button.
Picture
Management
Ensure the power cord is connected to the AC outlet correctly.
Cannot operate the remote control.
For HDMI signal, wrong screen size.
•
The skip can be set to all channels of Air (CH02 - CH69)
and Cable (CC01 - CC125).
Color
System
Select an appropriate Color system.
(Auto / PAL / SECAM / NTSC3.58 /
NTSC 4.43 / PAL-M / PAL-N)
Change the aspect ratio.
(Auto / Regular / 14:9 Zoom / 16:9 Zoom
/ 16:9 Zoom Subtitle / Full)
Switch “Size” in “HDMI Setting” to “1” or “2”.
For HDMI signal, green and distorted screen
The batteries may be exhausted. Replace with new batteries.
Ensure that you are operation the remote control at less than 7 meters
from the front of your TV.
Language
Select your desired on screen display language.
Video-2 Setting Switch between video and component signal.
(Video / Component)
Wait a little for the signal to stabilize when switching the signal format for
an “HDMI” device.
Zoom
Closed Caption Select the desired caption or text channel.
Remote control stops working
For HDMI signal, No picture / No sound
Channel
Closed
Caption
Caption
Select to view close caption or text
information. (Off / CC / Text)
Select the desired caption.
(CC1 / CC2 / CC3 / CC4)
Select the desired text channel.
(T1 / T2 / T3 / T4)
CC
US
CCIR
OIRT
AUSTRALIA
AU-5
Unplug TV, several minutes later plug it in again.
Aspect ratio changed unintentionally
ZOOM
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or
“Analogue” or “Auto” for DVI devices.
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
S-1
S-2
S-3
S-4
S-5
S-6
S-7
S-8
S-9
MTS
Select the stereo and SAP broadcasted programs.
(Stereo / SAP / Mono)
Press “ ” button to return to your settings.
Bass
Weaker <--> Stronger
Text
Treble
Weaker <--> Stronger
AU-5A
PC screen alignment is off
Some functions do not work.
Surround
Balance
Al Volume
Ambient sound (Off / On)
• Closed Caption is not available for component
signal.
Adjust the “PC Position” in “PC Setting” of Set Up menu.
Blue screen appears on the screen
Switch “Blue Back” to “Off”.
Left Stronger <--> Right Stronger
Prevent sudden increase or decrease of sound.
(Off / On)
It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
S-18
S-19
S-20
S-21
S-22
S-23
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting
Setting for PC input.
(Auto / PC Position / Phase / Pixel)
Black or white dots appear on the screen.
Strange picture when using an external device
LCD panels use fine dots (“pixels”) to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
A
B
C
D
E
F
G
H
I
X
Y
Z
Z+1
Z+2
If the top of the image is distorted, check the video signal quality itself.
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the output setting of
the external device to 625i (interlace-scanning).
R3
R4
R5
AU-3
AU-4
Viewing Teletext
Watching Video or DVDs
1 Select the input source.
AV Select
No picture, No sound
A-5
A-4
A-3
A-2
A-1
You can watch the Teletext broadcast channel with Text Functions.
Some input do not output from OUT terminal.
1
TV mode <--> TEXT mode
J
1. Select
2. Set
0
01
46ꢀ6)$%/
2 Select a Teletext page by press number button (0-9).
• Move up or down a page by CHANNEL +/-.
1
Video - 1
OK
2
3
4
Video - 2
HDMI
PC
List Mode
: Book mark your favourite page.
MODE
ꢁ2ED
ꢁ'REEN ꢁ9ELLOW
ꢁ"LUE
Technical information
Specification
for select to save
save
• Operate the connected device and play video.
Press number button
for enter the number
of page.
Sound and Colour system in your country or region
What is “Clear SD”
Main unit
Terminals / Connectors
2 Select “Set Up” Menu.
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear SD
mode resolves disadvantage for better picture quality.
Broadcasting systems B / G / I / D / K / M / N
Area
Country or Region
System System
Terminal name
Terminal type
Signal type (IN)
• Recall your favourite page by press the colour button.
PAL / SECAM / NTSC 3.58 MHz / NTSC 4.43 MHz
/ PAL-M / PAL-N
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore,
Thailand, India, etc.
VIDEO-1
RCA connectors x 3 Composite video, Audio L/R
RCA connectors x 5 Composite video, Analogue
component 480i (525i) / 576i (625i),
Progressive : 480p (525p) / 576p
(625p),
HDMI setting
Size
: Setting for HDMI input.
: Auto / 1 / 2
If wrong screen size appears in 480p (525p),
change to “1” or “2”
: Auto / Analogue / Digital
If no sound, change to “ Analogue “ or “ Digital”
: Setting for PC input.
Colour systems
Hold
: Hold the current page.
• Cancel by press this button again.
B/G
VHF low channel (VL) = 46.25 to 140.25 MHz
Area-1 VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
PAL
D/K
Asia,
Middle
East
Reveal
: Display hidden information.
China, Vietnam, etc.
example : answer to a quiz, etc
VIDEO-2
Audio
Hong Kong, etc.
I
VHF low channel (VL) = 55.25 to 127.25 MHz
Area-2 VHF high channel (VH) = 133.25 to 361.25 MHz
UHF channel (U) = 367.25 to 801.25 MHz
Channels and
frequencies
HD : 720p (750p) / 1080i (1125i) /
1080p (1125p)
Size
: Double the size of the displayed text.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
B/G
M
SECAM
NTSC
PC Setting
Auto
Index
Cancel
: Returns to page “100” or a previously designated page.
Input
terminals
Audio L/R
: Automatic adjust by 2.
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41)
SECAM
HDMI connector x 1 HDMI 480i (525i) / 480p (525p) /
576i (625i) / 576p (625p) / 720p
(750p) / 1080i (1125i) / 1080p
(1125p)
No use “Clear SD”
Use “Clear SD”
PC Position : Adjust screen position by 3/ 4.
: Leave the current page open, while you switch to watch
D/K
TV.
OK
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
And set by
.
HDMI
Europe
Sound-multiplex
systems
NICAM ( I / B / G / D / K ), A2 (B / G / D / K)
MTS (Multi-channel Television Sound)
• Useful when running a page search.
B/G
PAL
Phase
Pixel
: Sets the focus of screen.
: Adjusts the horizontal feature of screen.
Connect “DVI” devices
Sub-page
: Display the number of Sub-page.
I
Teletext systems
Power requirements
FLOF (Fastext), WST (World System Teletext)
AC 110 V - 240 V, 50/60Hz
PC INPUT
D-SUB (15 pins) x 1 Analogue PC signal
• Cancel by press this button again.
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
B/G
I
PAL
HDMI Analogue/
DVI Analogue/
PC Audio
Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
INPUT VIDEO-2.
RCA connectors x 2 Audio L / R
Audio output
(Rated power output)
3 W + 3 W
PAL
Africa
Nigeria, etc.
Language group for Teletext
PC Signals that can be displayed
• If the signal doesn’t appear, check that the vertical frequency on the PC is
set to “60Hz”.
B/G
Speakers
(3.5 cm x 5.5 cm ) x 2
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.
Egypt, Morocco, etc.
Agentina, Paraguay, Uruguay
Brazil
SECAM
PAL
• HDMI Analogue / DVI Analogue / PC Audio use terminal common with
VIDEO-2.
• We may change the design and specifications without notice.
• HDMI, the HDMI Logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Power consumption
[standby]
Screen size
(visible area size
measured diagonally)
32 W
[0.5 W]
Group
Languages
N
Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Greek, Swedish, Finnish
South
M
Resolution
640 x 480 (VGA) / 1024 x 768 (XGA)
60.0
America
Chile, Peru, Bolivia, Colombia, Venezuela,
Ecuador, etc.
47 cm
Vertical frequency
M
NTSC
Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, German,
French
Dimensions
(W x H x D: mm)
[without stand]
* Machintosh* computers are not supported.
(Machintosh is a registered trademark of Apple Computer, Inc.)
475 x 356.8 x 181.3
[475 x 311.8 x 59.5]
Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian,
Croatian, Slovenian, Czech, Slovak, English, German
Weights
[without stand]
4 kg
[3.5 kg]
Group-4 Arabic, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Swedish, Finnish
Power cord x 1
Group-5 Farsi, Hungarian, English, German, French, Italian, Swedish, Finnish
Remote control unit : RM-C2020 x 1
AAA/R03 dry cell battery x 2
Screw x 1
Accessories
•
If the characters are unreadable. ➡ Select different Teletext language group.
4
5
6
|